Use and Care Manual

Emergency Shutdown Procedure

If a breakdown/accident occurs while the machine is operating, follow the procedure

below.

1. Press the emergency stop switch on panel.

Activate the emergency stop switch by pushing the button. Pushing the emergency

stop switch:

 turns off (opens) the main circuit breaker

 cuts power to the fuel solenoid

 stops the engine

The emergency stop switch will remain activated until the switch is pulled out.

Note: Press the emergency stop switch only in the case of an actual emergency where the

machine must be stopped immediately.

2. Engage the parking brake.

3. Allow the machine to cool.

4. Using appropriate equipment, return the machine to an upright position if tipped over.

5. Contact the rental yard or machine owner for further instructions.