Use and Care Manual

38
Using the Water Spray System
Water spray controls
Water from the tank is fed to the spray nozzles by an electric pump. A water spray switch
(c) controls the water pump motor. A water spray dial (d) controls the water flow.
To operate the water spray controls:
Water spray switch position 1: activates the water spray
Water spray switch position 2: stops the water spray
Water spray dial: Rotate the dial clockwise to increase spray frequency.
Rotate the dial counter-clockwise to decrease spray frequency.
Guidelines when using
 When using the water spray system:
 Check that the tank is full of water.
 Use only clean water. Dirty water, even when filtered, can clog the system.
 Keep the water system clean and well maintained. See Maintenance.
 If spray does not begin immediately when the system is turned on, it may be
necessary to clean the spray bars. See Maintenance.