Use and Care Manual

Using the Forward / Reverse Lever

Background

Both roller drums are driven. An infinitely variable displacement pump drives the hydraulic

motors fitted to each drum. The machine moves forward or reverse by using the

forward/reverse lever located to the side of the operator’s seat.

Travel direction

Move the forward/reverse lever into FORWARD (f) or REVERSE (r) according to the

direction of travel desired.

To change direction of travel from FORWARD to REVERSE or vice versa:

1. Move the forward/reverse lever to the “N” NEUTRAL position (n).

2. Allow the machine to come to a complete stop.

3. Move the forward/reverse lever in the direction desired.

Note: In order to comply with safety standards, the machine has a device which only

enables starting of the engine when the forward/reverse lever is in the neutral position.

Travel speed

■ Travel speed varies from “ZERO” to a permitted maximum of 10 kph.

■ The farther forward or reverse the forward/reverse lever is positioned, the faster the

roller will travel.

■ Travel speed is the same in both FORWARD and REVERSE.

Note: When negotiating slopes, keep the forward/reverse lever at minimum travel speed.

Braking

The forward/reverse lever can be used as an engine brake. Shifting the forward/reverse

lever to the neutral position stops the machine.

Operator present system

The machine is equipped with an operator present system. The system prevents the

machine from moving forward or reverses unless the operator is seated. The operator

should remain seated at all times.