Use and Care Manual
35 
Using the Seat Belt 
Precaution 
Always use the seat belt when operating the machine. 
To use 
To use the seat belt: 
1.  Pull seat belt (c) out of the retractor in a continuous motion. 
2. Fasten seat belt catch (b) into buckle (a). 
3. Position the seat belt low across the lap of the operator. The retractor will adjust the belt 
length and the retractor will lock in place. 
4. Push the release button (d) on the buckle in order to release the seat belt. The seat belt 
will automatically retract into the retractor. 
CAUTION 
Possibility of injury. A worn seat belt may not protect the operator in an 
emergency. 
  Replace the seat belt every three years. 










