Use and Care Manual
30
3. Gently lower the upper half of the ROPS.
NOTICE: When lowering the ROPS, do not drop the upper frame.
Sudden impacts can weaken or damage the ROPS.
4. Insert the locking pins and secure them with the washers (5) and cotter pins.
Rotating Beacon (if equipped)
The rotating beacon (a) powers up when the ignition switch is turned to the ON position.
The beacon illuminates and rotates when powered up. To install the beacon:
1. Slide the rotating beacon onto the light staff.
2. Tighten the wing nut on the base of the light.