Manualshelf

Use and Care Manual

ManualsBrandsTomahawk Power ManualsOutdoor Power Equipment1.5-Ton Asphalt Roller with 20.8 HP Honda Engine 2300 lbs. Double Drum Road Roller for Compaction
11121314151617181920
19
Tying Down and Transporting the Machine
Requirements
Engine shut down
Parking brake ON
Procedure
Perform the procedure below to tie down the machine.
1. Make sure that the transport vehicle is capable of handling the weight and size of the
machine. See Technical Data for dimensions and operating weight.
2. Lock the articulated steering joint (a).
3. Block or chock the drums as shown.
4. Attach steel ropes or chains to each of the two tie down bars (b) on the front and ear of
the machine.
5. Attach the other end of the chains to the transport vehicle.
NOTICE
Do not position ropes or chains across the machine frame or the
articulated joint when tying down the machine. Damage to the
machine may occur.
Do not completely compress the shock mounts when tying down
the machine. Damage to the shock mounts may occur.
Do not leave the machine tied down for extended periods of time
(except when transporting). Damage to the shock mounts may
occur.