TR68 Operations Manual

13
5. Soil contacting surface of the foot is lined with heat-treated metal sheet for extra
strength. However, for compacting cobblestone, use the filling-up soil for example so
that the foot hits the soil uniformly.
6.
The tamping rammer has been designed to advance while jumping. For quicker
advance, erect the machine by pushing its handle down slightly so that flat surface of the
foot at its rear-end contacts the ground.
7. To stop the tamping action, move throttle lever quickly from the FULL OPEN to IDLE
position.
2.6
To Stop
2.6.1
Normal Shutdown
1. With the throttle lever closed from ON to OFF, run the engine for 3-5 minutes at low
speed, and after the temperature is lowered, turn the switch to the position.
2.
Close the fuel shut-off valve by moving the fuel cock lever to the CLOSED position.
2.6.2
Emergency Shutdown
Move the throttle lever quickly to the IDLE position, and turn the ON/OFF switch
to the OFF position.