TPC90 Operations Manual

3. MAINTENANCE
3.1 Periodic Maintenance Schedule
These inspection intervals are meant for operation under normal conditions.
Adjust your inspection intervals based on the number of hours your plate compactor is
in use, and particular working conditions.
3.2 Exciter Oil
When changing the exciter oil, place the exciter on a at, horizontal surface, remove the drain plug located at
the bottom-right of the vibrator, and simply tip the compactor to drain the oil. Note that the oil will drain
more easily while it is hot. DO NOT pour in too much oil.
Daily
After First
20 Hours
Every
50 Hours
Every
100 Hours
Every
200 Hours
Starting Check
Loosened of Lost Screws
Damaged to Parts
Control System Functioning
Exciter Oil Check
Exciter Oil Replacement
V-Belt (Clutch) Check
Leakage of Oil Fuel
Tightness of Fastening Threads
Engine Oil Check and Replenishment
Engine Oil Replenishment
Air Filter Cleaning
14