Warranty

5. Spark arrester maintenance (optional part)
If the engine has been running, the muffler will be very hot.
Allow
it to cool before proceeding.
1. Remove the two 8 mm nuts @ and the muffler assembly.
2. Remove the three 4 mm screws @ and remove the exhaust deflector
3. Remove the eight 5 mm screws @ and remove the muffler protector @
4. Remove the 4 mm screw @ and remove the spark arrester @ from the
0.
from the muffler @.
muffler.
5. Use a brush to remove carbon deposits from the spark arrester screen.
Be careful not to damage the spark arrester screen.
SCREEN
NOTE: The spark arrester must be free of breaks and holes. Replace, if
necessary.
6. Install a new muffler gasket 8. Install the spark arrester and the muffler
in the reverse order of disassembly.
28