TPC80 Operations Manual

17
7.1 Poly Pad Assembly
7.1 Grab the poly pad hardware kit a 5mm allen wrench and a 13mm wrench to complete
this assembly.
7.2 Flip the compactor over and begin removing the screw around the plate using a 5mm
allen wrench. (Fig. 17)
7.3 Attach the pad using the larger screws found in the hardware kit. (Fig. 18)
7.4 Fasten the larger screws with a 13mm wrench. (Fig. 19)
7.5 Fasten the bottom screws. (Fig. 20)
7.6 Right-side the plate compactor gently. (Fig. 21)
Fig. 16 Fig. 18Fig. 17
Fig. 19 Fig. 21Fig. 20
22