TPC80 Operations Manual

21
6. Handle Assembly
6.1 Remove the bolts and isolation mounts from the back of the compactor. (Fig. 10)
6.2 Fit the isolation mounts into the bottom of the handles. (Fig. 11)
6.3 Align the base of the handles to the back of the compactor and fit into the
brackets. (Fig. 12)
6.4 Fit the bolts back into the isolation mounts on either side of the handles. (Fig. 13)
6.5 Fasten in place the nuts. (Fig. 14)
6.6 Securely tightly. (Fig. 15)
Fig. 10 Fig. 12Fig. 11
Fig. 13 Fig. 15Fig. 14