Use and Care Manual
Operator’sManual 8
Operator's manual
Always keep the operator's manual near the machine or near the worksite for quick
reference.
If you have misplaced the operator's manual or require an additional copy, contact
your Tomahawk Power Equipments representative or download the operator's
manual from the Internet (www.Tomahawk-Power.com).
Always handover this opera
tor's manual to other operators or to the future owner of
the machine.
Country-specific regulations
Observe the country-specific regulations, standards and guidelines in reference to
accident prevention and environmental safety, for example those pertaining to
hazardous materials and wearing protective gear.
Complement the operator's manual with additional instructions taking into account the
operational, regulatory, national or generally applicable safety guidelines.
Operator's controls
Cleaning
Always keep
the operator's controls of the machine dry, clean and free of oil or
grease.
Operating elements such as ON/OFF switch, gas handles etc. may not be locked,
manipulated or changed without authorization from Tomahawk Power Equipments.
Always keep the machine clean and be sure to clean it each time you have finished
using it.
Do not use gasoline or solvents. Danger of explosion! Do not use high pressure
washers. Permeating water can damage the machine.
When electrical equipment is present, this can pose a serious injury risk from electric
shocks.
Checking for signs of damage
Inspect the machine when it is switched off for any signs of damage at least once per
work shift.
Do not operate the machine if there is visible damage or defects.
Have any damage or defects eliminated immediately.