TPC400Z Operations Manual

Operator’sManual 7
Requirements for operation
The ability to operate the machine safely requires:
• Proper transport, storage and setup.
• Careful operation.
• Careful service and maintenance.
Operation
• Operate the machine only as intended and only when in proper working condition.
• Operate the machine in a safety-conscious manner with all safety devices attached
and enabled. Do not modify or disable any safety devices.
• Before starting operation, check that all control and safety devices are functioning
properly.
• Never operate the machine in a potentially explosive environment.
Supervision
Never leave the machine running unattended!
Maintenance
Regular maintenance work is required in order for the machine to operate properly
and reliably over time. Failure to perform adequate maintenance reduces the working
efficiency of your machine
• Strictly observe the prescribed maintenance schedules.
• Never run the machine if it requires maintenance or repairs.
Malfunctions
If you detect a malfunction, you must shut down and secure the machine immediately.
Eliminate the malfunctions that impair safety immediately
Have damaged or defective components replaced immediately
For further information, refer to chapter Troubleshooting.
Spare parts, accessories
Uses only spare parts as prescribed from Tomahawk Power Equipments or such
that
are equivalent to the original parts in design and quality. Only use accessories
from Tomahawk Power. Non-compliance will exempt the manufacturer from all
liability.