Use and Care Manual

7 / 12
V. Operation
1. The operator should use the sweeper under normal operation and consider the
surrounding environment when operating; be cautious of people around the sweeper
and objects that may unintentionally sweep in an outward direction.
2. Depending upon the service the operator intends to sweep you can adjust the best
height of the front and back brushes. The higher the brushes the less pressure on the
surface. A higher brush may be less effective but will increase the longevity of the
brush. The lower settings of the brush will be more effective at sweeping but harder
to push and decrease the longevity of the brush.
3. If Debris is not going into the sweeper. Try sweeping quickly with some force over
the debris pile to push the trash into the sweeper trash bin. Note: Do not backup
the sweeper it will not properly collect trash in the reverse direction
Assembly
Handle and adjusting bolt assembly Front brush and fixed bolt
Note:
Do not over-twist to prevent bolt damage.
Adjusting Height of Brush