Use And Care Manual

To begin using, add 50:1 Pre Mix Fuel (fuel
not included)
Attach the other end to the back of the
water valve and the 2nd tube to the front.
To begin fogging, add 50:1 Pre Mix Fuel
(fuel not included)
TMD14-BRAVO: Blower Assembly 2 www.tomahawk-power.com
Slip the throttle handle over the connecting
pipe (B) and tighten with the bolt and wing
If already set assembled as a fogger, simnply
remove the fan nozzle and clear tube.
Wrap the 2nd tube around the blower pipe
(C) and attach its end to the fan nozzle (D)