Use And Care Manual
Slip the throttle handle over the connecting
pipe (B) and tighten with the bolt and wing nut.
Attach the other end to the back of the
water valve and the 2nd tube to the front.
To begin fogging, add 50:1 Pre Mix Fuel
(fuel not included)
TMD14-BRAVO: Assembly 2 www.tomahawk-power.com
Attach the fan nozzle (D) to the end of the
blower pipe.
Secure one end of a clear tube to the base
of the fogger’s chemical tank.
Wrap the 2nd tube around the blower pipe
(C) and attach its end to the fan nozzle (D)