Operations Manual

Table Of Contents

Difficulties dusting:

Difficulties fogging (when using Liquid Tank Conversion Kit):

Storage

For long-term storage of the duster, first perform all regular maintenance procedures and

needed repairs. Empty the fuel tank. Disconnect the fuel supply line from the carburetor and

depress the primer bulb until fuel stops discharging from the fuel-return line. Start the engine

and allow it to run until it stops. Pull the starter cord a few times to remove any excess fuel from

the engine. Remove the spark plug and insert a small amount of oil into the cylinder. Slowly pull

the starter cord and bring the piston to a position closest to the spark plug hole. Re-install the

spark plug. Apply a thin coating of oil to all the metal surfaces and store the duster in a dry

place.