TOMAHAWK www. TGS30: Assembly Guide Pt. 1 Remove all parts farm the TGS30 Granular Spreader Box. Attach the ribbed tube (A) to the granular spreaders elbow, La Fasten the clamp on the ribbed tube (A) the to the elbow with a screwdriver. 4 Fasten the second clamp on the ribbed ube {A) tithe straight tube {B). 5 Fasten the straight tube (B) to tube (C). Twist to lock, 6 Tighten the screw with a screwdriver to fasten both tubes together.
TOMAHAWK TGS30: Assembly Guide PL. 2 Slide the accelerator handle over the tube (CG). Fasten the accelerator handle to the tube (C) Adjust to your deal position. with the wingnut washer: 4 Locate the throttle assembly. 6 Push the screw through the throttle assembly ole. 5 Loosen the screw washer.
TOMAHAWK TGS30: Assembly Guide PL. 3 Align the throttle assembly's slit ito place Thread the accelerator cable though the and line up the housing. metal hole and fasten the screw washer, above. a & 4 Move the throttle down again 10 lock the accelerator cable into the last channel. Move the throttle up 1 rock the.
