TG2000i Operations Manual

OPERATION
1) Fuel Tank Cap
a. Open the fuel tank cap Counterclockwise
2) Grounding Terminal
a. To prevent electrical shock, ground the generator. The grounding terminal is located on
the control panel.
3) Start the Generator
a. Put the ECO switch to the “OFF” position
b. Twist the cap ventilation button to the “ON” position
c. Twist the switch to the “CHOKE” position
i. Open the fuel
ii. Open the Iginition System
iii. Close the Choke
Note: If the generator is hot when starting the engine, do not close the choke. Turn the switch to the
“ON” position.
4) Pull the recoil cord slightly. When you feel the recoil force, pull the handle forcefully.
Note: Hold the handle of the inverter generator when pulling the recoil cord. This is to prevent the
generator form tipping over.