Use and Care Manual

3.2 Lubrication

The long life and successful operation of any machinery is dependent on frequent and

thorough lubrication. Before using the machine, always check the oil and use proper oil

with the correct type and grade as recommended.

NOTICE: DO NOT mix types of engine oil and DO NOT overfill the oil. Damage to the ma-

chine may occur if oils are mixed or overfilled. See Technical Data for oil quantity and

type.

3.3 Spark Plug

Check and clean spark plugs regularly. A fouled, dirty spark plug may cause hard starting

and poor engine performance. Set spark plug gap to recommended clearance. Refer to

engine manual.

The muler and engine cylinder become very hot during operation and

remain hot for a while aer stopping the engine. Allow engine to cool

before removing spark plug.

NOTICE: A loose spark plug can become very hot and may cause engine damage.

3.4 Air Filter

Maintaining a clean engine will extend engine life. Keep air filter clean at all times. Clean

air filter using the recommended solvent daily. See engine manual for proper cleaning

procedure. Let the filter dry before reinstalling.

3.5 Transporting

1. Before transporting the machine, ALWAYS turn o the engine and pull out the key from

the machine.

2. Make sure liing device has enough capacity to hold machine (see identification plate

on machine for weight).

3. Use liing point when liing the machine.

4. Optional trolley wheel is used for short distance transportation.

WARNING