Use and Care Manual

6
-ALWAYS allow the machine a proper amount of time to cool before servicing.
-Keep the machinery in running condition.
-Fix damage to the machine immediately and always replace broken parts.
-Dispose of hazardous waste properly. Examples of potentially hazardous waste are used
motor oil, fuel and fuel filters.
1.3 Operator Safety while Using Internal Combustion Engines
-DO NOT smoke when refueling the engine or operating the machine.
-DO NOT refuel a hot or running engine.
-ALWAYS keep away from all hot or spark-generating objects when refueling the engine.
-ALWAYS refill the fuel tank until the machine has cooled, and in a well-ventilated envi-
ronments.
-DO NOT spill fuel when refueling the engine.
-ALWAYS take care to use the appropriate type of fuel.
-ALWAYS inspect for fuel leakage regularly.
-NEVER perform any work on the machine while it is running. Before performing any
maintenance, stop the engine and disconnect the spark plug wire to prevent accidental
starting.
-Avoid prolonged breathing of exhaust gases.
-ALWAYS transport and handle fuel only when contained in approved safety containers.
-Avoid touching or leaning against hot exhaust pipes.
-Allow the engine to cool before performing any repairs or service.
-ALWAYS keep the area around the muler free of debris such as leaves, paper, cartons,
etc. A hot muler could ignite the debris and start a fire.
1.4 Label Locations