Use and Care Manual
CAUTION: Used without the safety alert symbol, CAUTION indicates a potentially hazard-
ous situation which, if not avoided, may result in property damage.
1.2 Operating Safety
WARNING: Failure to follow instructions in this manual may lead to serious injury or
even death! This machine is to be operated by trained and qualified personnel only! This
machine is for industrial use only. The following safety guidelines should always be used
when operating this concrete floor saw.
1.2.1 General Safety
-DO NOT modify the machine without the prior consent of the manufacturer. We do not
assume responsibility for any accident due to equipment modification.
-NEVER operate the machine for any purpose for which it is not intended.
-NEVER allow anyone to operate the machine without proper training and under 18 years
old. Those who operate the machine must be familiar with the risks and hazards associ-
ated with it.
-ALWAYS operate the machine with all safety devices and guards in place and in working
order.
-DO NOT wear loose fitting clothing that might get caught in the machine.
-DO NOT operate the machine in poorly ventilated spaces. There is a risk of carbon mon-
oxide poisoning.
-ALWAYS wear eye protection, ear protection and steel-toed boots during work.
-DO NOT use the machine if you are experiencing discomfort, cramps, pain, or work
under the influence of drugs or alcohol.
-DO NOT use the machine near flammable material or in explosive atmosphere. The
exhaust pipe can become very hot during operation. Sparks may be emitted from it, and
ignite flammable material.
-ALWAYS check that all controls are functioning properly immediately aer start-up. DO
NOT operate the machine unless all controls operate correctly.
-NEVER operate the machine with the fuel cap loose or missing.
-NEVER touch the engine, exhaust system, muler and cylinder. They are extremely hot
during operation.
-DO NOT touch the V-belt and rotating parts during operation.
-Block the machine when leaving or operating on slopes.
1.2.2 Diamond Blade Safety
-ALWAYS use the appropriate diamond blade for cutting.
-ALWAYS check the diamond blade before using. The blade should exhibit no cracks,
dings, or flaws in the steel centered core and/or rim.
4