TBUGGY300e POWER BUGGY Operation Manual 1 YEAR Honda Engine on WARRANTY FIND THE HOW TO GUIDE ON
TABLE OF CONTENTS 1. Safety Information 1.1 Operating Safety 1.2 Service Safety 2. Technical Performance 2.1 Technical Performance 2.2 Specifications 3. Operating Controls 3.1 Getting Started 3.2 To Move Forward 3.3 To Reverse 3.4 To Stop 3.5 To Emergency Stop 3.6 To Empty / Reset Skip 3.7 Charging the Battery 4. Operations Controls Diagram 5. Maintenance 6. Circuit Diagram 7.
Register Your Equipment Thank you for purchasing TOMAHAWK equipment! Your product is covered by the TOMAHAWK Warranty Policy, but in order to activate your warranty, we need you to register your product. In addition to activating your equipment warranty, product registration will grant you access to important product updates, streamlined customer service, and more.
This manual provides information and procedures to safely operate and maintain this equipment. For your own safety and protection from injury, carefully read, understand, and observe the safety instructions described in this manual. Keep this manual or a copy of it with the equipment. If you lose this manual or need an additional copy, please contact Tomahawk Power LLC or visit www.tomahawk-power.
CAUTION: Used without the safety alert symbol, CAUTION indicates a potentially hazardous situation which, if not avoided, may result in property damage. 1.1 Operating Safety Familiarity and proper training are required for the safe operation of equipment! WARNING Equipment operated improperly or by untrained personnel can be dangerous! Read the operating instructions contained in both this manual and the engine manual and familiarize yourself with the location and proper use of all controls.
1.1.16 ALWAYS operate machine with all safety devices and guards in place and in working order. DO NOT modify or remove safety devices. DO NOT operate machine if any safety devices or guards are missing or inoperative. 1.1.17 ALWAYS read, understand, and follow procedures in Operator's Manual before attempting to operate equipment. 1.
2.2 Specifications Model Motor Type Battery Charge Working Temperature Capacity Brake Cables Wheels Max Slope Dimensions Weight Max Speed Endurance TBUGGY300e 1000W Electric Motor Brush Less 4WD Chain Drive All Terrain with Hydraulic Tipping 48V-20Ah 220V/ 50-60Hz 50°F ~ 104°F (-10°C ~ 40°C) 8cu.ft. or 650 lbs weight / 300 kg Electromagnetic Brake Protected Front 400x10, Rear 400x8 20° L-63",W-31",H-36" (L-1600mm,W-780mm,H-920mm) 342 lbs / 155 kg (with battery) 3.72mph (5.
3. Operating Controls 3.1 Getting Started 3.1.1 Using the battery charger cable, charge the batteries until the battery symbol shows FULL. 3.1.2 Check that the locking catch of the skip has engaged before moving. 3.1.3 For first time use, switch ON the main power. 3.2 To Move Forward 3.2.1 Turn the key switch to the “ON” position. 3.2.2 Choose the speed on the panel as following: 1: Min speed - 1.24 mph (2km/hr) 2: Mid speed - 2.5 mph (4km/hr) 3: Max speed - 3.72(6km/hr) 3.2.
3.3 To Reverse 3.3.1 Release the left hand lever and right hand throttle to stop the Power Buggy. 3.3.2 Press the black button on the right control handle to “R” status. The machine will sound its alarm. 3.3.3 Gently engage the left hand lever, the Power Buggy will move backwards. 3.3.4 Move the throttle. The more you press, the faster it will run.
NOTE - When pressing the red button on the left handle while the power is ON, the Power Buggy can be moved forward and in reverse. - Parking brake (P & N) instructions: When working, keep Power Buggy in the “P” position. When the power is OFF, keep in the “N” position to move the machine. - If the Power Buggy is not used for a long period of time, fully charge the battery and turn OFF the main power switch.
3.4 To Stop 3.4.1 Release the control lever. The Power Buggy will slow down and stop. The parking brake will automatically turn on. 3.4.2 Turn the key switch to the “OFF” position. 3.5 Emergency Stop 3.5.1 Push the red button to turn off immediately. 3.5.2 To reset the emergency stop, turn the red button to the right. 3.6 To Empty / Reset Skip 3.6.1 Stop the machine and press switch B EMPTY RESET NOTE: Make sure there are no people in front of the Power Buggy. 3.7 Charging the Battery 3.7.
Red Button Unlock the Brake When Power Is On LEFT HAND Deadman Lever 1 LEFT HAND 1 2 3 1 2 4 E: Key Ignition D: Emergency Stop C: Select Speed B: Empty Bucket A: Charging Interface Press Switch B to Empty the Bucket EMPTY BUCKET 4 Reverse 3 Forward 2 Accelerator RIGHT HAND NO LIFTING PEOPLE Tire Pressure: 25-30 PSI 4.
5. Maintenance Routine checks of your Power Buggy will ensure trouble-free operation. Inspect and/or service your power buggy at the intervals shown below. A daily check takes only minutes, but could save you hours of time and money.
6.
TAKE BACK YOUR YARD Nothing is more frustrating than living in fear of the pests in your own backyard. Billions of mosquitos and other pests ruin outdoor activities for your friends and family every year. We are here to fix that. Tomahawk Mosquito Foggers deliver the power to eliminate these virus-carrying pests, before they reach your loved ones. No more itchy bites or spoiled plans! Enjoy the peace of mind knowing that your family is protected in your own Item #: TMD14 3.
NEVER PUMP NEVER LOSE PRESSURE Lose the manual pump and gain the power to spray 15,000 ft² in 10 minutes or less while maintaining constant, adjustable pressure from 50-435 PSI with your ideal concrete sealant, cure, top cast, form release, and more! Item #: TCS6.5 6.5 GAL MOTORIZED CONCRETE SPRAYER www.tomahawk-power.
COMPACTION FINISHING GENERATORS 3,550 lbs/ft Vibratory Rammer 3,400 lbs/ft Plate Compactor 3,000 lbs/ft Plate Compactor 3.6 HP Honda GXR120 Engine Easily achieve a 100% compaction rating 3-in-One Fuel System with carburetor protection 13” x 11” plate for narrow trenches and corners 3 Year Engine Warranty & 1 Year Product Warranty 5.5 HP Honda GX160 Engine Easily achieve a 100% compaction rating 22” x 20” cold, rolled steel beveled base plate Includes 3.
USE CODE SAVE10 AT CHECKOUT FOR 10% OFF AND MORE PEST CONTROL WELDING / POWER YOUR NEXT ORDER* INVERTER SERIES INVERTER SERIES 120 Amp Portable Welder Generator 210 Amp Portable Welder Generator 9000 Watt Generators Steady 120 Amp DC welding output 60% Duty Cycle for extended use Suitable for welding rods from 6010 to 6013 Includes wheel kit for job site portability 2 Year Product Warranty Steady 50 - 210 Amp DC welding output 60% Duty Cycle for extended use Suitable for welding rods from 6010
Power Your World Tomahawk understands to keep a job-site running smoothly the proper equipment and spare parts are needed at the drop of a hat. With same day shipping and faster delivery times, count on Tomahawk to keep you powered throughout the day! With long lasting parts and engines, Tomahawk equipment will be the star of your fleet for years to come. Visit www.tomahawk-power.com to get started today! Tomahawk Power, LLC San Diego, CA Sales Support (866) 577-4476 sales@tomahawk-power.
