Operations Manual

10
4. PRIMING THE PUMP
4.1. Connect the filter to the orange hose.
4.2. Place the filter and clear tube into your
tank or water receptacle of choice.
4.3. Start the engine [See Page 11].
4.4. Shake the orange hose up and down to
help the fluid be pulled through the tube.
NOTE: Better results may be achieve if the
skid sprayer sprayer pump is placed below
the water tank.
4.2 Under Priming the Pump
4.2.1 All air must be out of the hoses in order
to prime the pump. If the machine is not
spraying check to see the pump is primed.
4.2.2 Do not run the pump without water or
liquid. This will damage internal ceramic
seals and could damage the pump, voiding
the warranty.
4.2.3 Aer every use, make sure to the rinse
pump and flush with hoses with water. Any
chemicals le in the pump and hoses can
crystalize causing damage, voiding the
warranty.