Operations Manual

2.9 Blades

The blades of the trowel are used to finish the concrete as they rotate around your given

surface. This trowel includes 4 combination blades (8 in./203mm wide) per rotor. They are

equally spaced in a radial pattern and attached to the vertical rotating sha by means of the

spider assembly.

2.10 Centrifugal Clutch

In the event of a trowel runaway condition (the operator releases the handle), the centrifugal

clutch will stop the engine and bring the trowel to a complete stop.

2.11 Training

For proper training education, refer to the “TRAINING CHECKLIST” section located in the

back of this manual. This checklist contains an outline for an experienced operators to

provide training to a new operator.

3. TECHNICAL DATA