Operations Manual
2
Insert the bolts and washers through the
holes in the handle bar - fasten with a nut.
4
Fit the screw through the pin and fasten the
nuts on the top and bottom to keep it in place.
6
Place the bolt through the base of the
handles and then fasten with a nut on the end.
1
Insert the end of the handle bar column into
the base of the trowel.
3
Unscrew the nut from the pin and insert the
pin through the base of the trowel.
5
Fit the handle bars around the eye towards
the top of the handle bar column.
10
4. QUICK ASSEMBLY GUIDE