Operations Manual

9
2.9 Blades
The blades of the trowel are used to finish the concrete as they rotate around your given
surface. This trowel includes 4 combination blades (8 in./203mm wide) per rotor. They are
equally spaced in a radial pattern and attached to the vertical rotating sha by means of the
spider assembly.
2.10 Centrifugal Clutch
In the event of a trowel runaway condition (the operator releases the handle), the centrifugal
clutch will stop the engine and bring the trowel to a complete stop.
2.11 Training
For proper training education, refer to the “TRAINING CHECKLIST” section located in the
back of this manual. This checklist contains an outline for an experienced operators to
provide training to a new operator.
3. TECHNICAL DATA
Number of Blades 4
Ring Diameter 24.0 in. (61 cm.)
Rotor 70-130 RPM
Path Width 24 in. (61 cm.)
Vibration (Hand/Arm)1 18.9 m/s2
Sound Pressure (A-Weighted)2 83.5 dB(A)
Sound Pressure (Peak, C-Weighted) 90.5 dB(C)
Sound Power Level (A-Weighted) 97 dB(A)
Trowel Specifications
JXPT24K TROWEL SPECIFICATIONS
Model Kohler CH260
Type 4-stroke, Overhead valve, Single Cylinder
Bore X Stroke 2.8 in. X 2.1 in. (70 mm x 54 mm)
Displacement 208 cc
Max Output 6 H.P. at 3,600 R.P.M.
Fuel Tank Capacity Approx. 3.3 U.S. Qts
Standard Idle Speed 1,400 +200/-150 R.P.M.
Fuel Unleaded Gasoline
Lube Oil Capacity 0.63 U.S. Quarts (0.58 Liters)
Speed Control Method Centrifugal Fly-weight Type
Gearbox Oil Type Mobil SHC Synthetic Gear Oil (10
oz)
Starting Method Recoil Start
Engine Specifications
JXPT24K TROWEL SPECIFICATIONS