Operations Manual

ADDING CHEMICALS AND ADJUSTING OPTIONS
Adding Chemicals
Warning- Some chemicals sprayed with the mist blower can contain toxic
substances which can lead to serious side effects and injury.
1. Avoid direct contact with chemicals and always follow the
instructions of the chemical manufacturer. Always wear the
proper clothing and chemical protection
2. It’s important to dilute your chemicals according to the chemical
manufacturer’s specifications. Never spray undiluted chemicals.
3. Dilute and prepare your chemicals prior to turn on your mist
blower.
4. Prepare your chemical and pour into the mist blower water tank
outdoors or in a well ventilated area.
5. After spraying, do not keep the spray solution in the tank.
Properly dispose of the excess spray solution and rinse your
machine after each use.
Adjusting Options
1. Water Flow- To adjust water flow use the water valve to
increase the flow of water from the tank. See Figure 2.
2. Water Speed- To adjust the speed of water use the accelerator
to speed the engine blow speed and increase pressure. See
Figure 3.
3. Dust Flow- To adjust dust flow move lever to the left. Move the
lever to the right to reduce dust flow. See Figure 4.
4. Spray Pattern- To adjust spray pattern use the small knob on
the horn nozzle. See Figure 5.
16