User Manual

1. Lid with spout and silicone ring
2. Milk jug
3. Handle
4. Power base
5. On/obuonwithindicatorled
6. Funconbuonwithindicatorlight
7. Mixer for warming - without spring
8. Whisk for frothing - with spring
PRODUCT DESCRIPTION
EN - 11
PRIOR TO FIRST USE
Before using the appliance for the rst me, please proceed as follows: carefully remove the milk frother from its
packaging and remove all the packaging material. Keep the packaging (plasc bags and cardboard) out of reach of children.
Aer unpacking the appliance, carefully check it for external damage that may have occurred during transport. The whisk is
packed at the boom of the appliance. Take note to unpack it from the power base.
Place the milk frother on a at, heat-resistant surface.
Clean the milk jug, lid, whisk and mixer with warm water and mild detergent. Dry these components thoroughly.
Only clean the base unit with a damp cloth, and dry thoroughly. The milk frother is only suitable for frothing and warming
milk. Never ll the milk frother with other liquids.
Check that the voltage corresponds with what is stated on the informaon plate. Insert the plug into the socket.
Place the mixer (without spring) at the boom of the milk jug onto the drive sha. Fill the milk jug with the required quanty
of milk.
Take note of the upper maximum indicaon for warming milk only - MAX
- 300 ml. The minimum capacity is 100 ml.
Place the cover and place the milk jug on the power base.
Press the funcon buon T repeatedly to select the correct funcon / temperature. The colour of the indicator light
in the funcon buon corresponds to the selected funcon.
WARM ± 38°C - green indicator light
HOT ± 68°C - red indicator light
Press the on/o buon to switch on the milk frother. The indicator led in the on/o buon will light and the mixer will start to
turn.
Depending on the quanty of milk, the milk frother will stop automacally aer approximately 310 to 550 seconds.
Once the selected programme is nished, the indicator led in the on/o buon will turn o.
When the drink is ready to serve, remove the milk jug from the power base and pour the warm milk into a mug or cup via
the spout. Remove the plug from the socket aer each use.
Aer use, the milk frother should be cleaned as described in the chapter CLEANING & MAINTENANCE.
Allow the milk frother to cool for 2 minutes before using it again, or pour some cold water into the milk frother. This will
allow it to be used again sooner.
WARMING MILK
8
7
1
6
5
4
2
3