Operation Manual

21
• Take the limescale filter out of the pouring opening.
• Rinse it under running water.
• Reinsert the rinsed limescale filter in the pouring
opening.
Please note!
Regularly descale the appliance. Depending on the
hardness of the water, scale deposits may become
attached to the inside of the appliance. The harder
the water, the more often it is necessary to descale the
appliance.
Descaling
• Use a descaling product intended for household
appliances (such as coffee makers).
• Follow the instructions on the package.
• Do not switch on the kettle during descaling. The
descaler should be applied in cold water.
• After descaling rinse the kettle a few times with clean
water.
STORAGE
Store the appliance in a dry place.
• Insert the plug into the mains power socket.
• Switch the appliance on by pressing the on/off switch
under the handle downwards. The indicator lamp in
the on/off switch will light. The kettle will switch off
automatically as soon as the water boils.
• If desired, boil the water one more time. Wait for
at least 30 seconds, however, after the kettle has
switched off automatically.
• Pour the water slowly, so that any limescale particles
remain behind on the limescale filter in the pouring
opening. If the kettle is accidentally switched on whilst
empty, the boil-dry protection will automatically switch
it off again.
• Remove the plug from the mains power socket.
Warning
If the kettle is filled above the maximum level, boiling
water may splash out.
CLEANING AND MAINTENANCE
Warning
Before cleaning the appliance, always switch it off,
unplug it from the electricity supply and allow it to cool
down completely.
Cleaning
• Do not clean the appliance with an aggressive or
abrasive cleaner or with a sharp object, such as a
hard brush or a knife.
• Clean the exterior of the jug with a damp cloth.
• Always clean the base with a dry cloth.
Instruction manual TM-9024