Operation Manual

20
DESCRIPTION OF PARTS
1
2
7
3
4
5
6
8 9
1. Handle
2. Button to open lid
3. On/off switch with indicator lamp
4. Level indicator
5. Foot
6. Power cord and plug
7. Spout
8. Removable limescale filter
9. Lid
OPERATION
This cordless kettle quickly brings 1.7 litre of water to
the boil. The kettle is equipped with an indicator lamp in
the on/off switch, a thermostat and boil-dry protection.
The level indicator clearly shows how much water is in
the kettle.
USING FOR THE FIRST TIME
• Remove all packaging from the appliance.
• Clean the appliance, see 'Cleaning and Maintenance'.
• First boil a full jug of water in accordance with the
procedure in ‘Using the appliance’, in order to clean
the jug.
• Dispose of the boiled water. If you then refill the kettle
with water, the boil-dry protection cools down and the
kettle is again ready for normal use.
• Continue with the procedure in ‘Using the appliance’.
USING THE APPLIANCE
• Use the kettle only with the supplied base.
• Remove the kettle from its base, to avoid spilling
water on the base during filling.
• Open the lid by pressing the button on the handle
and keeping it pressed down.
• Fill the kettle between the minimum and maximum
mark. Too little water will result in the kettle switching
off prematurely, and too much water may result in the
kettle boiling over.
• Close the lid.
• Place the jug on the base.
Instruction manual TM-9024