Operation Manual

8
PARTS DESCRIPTION
1. Lid with hole
2. Lid handle
3. Egg tray
4. Egg tray handle
5. Base
6. On/ off switch with power indicator light
7. Power cord
8. Stainless steel cooking element
9. Measuring cup
10. Egg pricker
BEFORE THE FIRST USE
Take the appliance and accessories out the box.
Remove the stickers, protective foil or plastic from the
device.
Place the device on a flat stable surface and ensure
a minimum of 10 cm. free space around the device.
This device is not suitable for installation in a cabinet
or for outside use.
Before using your appliance for the first time, wipe
off all removable parts with a damp cloth. Never use
abrasive products.
Put the power cable into the socket. (Note: Make sure
the voltage which is indicated on the device matches
the local voltage before connecting the device.
Voltage 220V-240V 50/60Hz)
USE
The egg cooker allows you to boil between 1 and 7
eggs at the same time. Whether the eggs are boiled
‘soft’, ‘medium’ or ‘hard’ depends on the amount of
water you add.
Use the measuring cup to get the amount of cold
water required.
Fill the top of the egg cooker with the water.
Pierce the blunt end of the eggs with the piercer (on
the egg tray)
Place the eggs into the holder and put it with the lid
on top unto the egg cooker.
Connect the plug to wall outlet and press the power
button.
1
3
10
8
5
6
2
4
7 9
Instruction manual TM-2463