User Manual

EN - 19
CLEANING AND MAINTENANCE
WARNING
Before cleaning the heang pad, always remove the plug from the socket. Otherwise you will run
the risk of an electric shock. Then disconnect the control from the heang pad by removing the
plug. Otherwise the heang pad could get damaged.
CAUTION!
The control may never come into contact with water or other liquids. It could get damaged as a result.
• Use a dry lint-free cloth for cleaning the control. Do not use chemical cleaning agents or abrasives.
• Small stains on the heang pad can be removed with a cloth or a damp sponge and, if necessary, a lile bit of gentle detergent
liquid.
CAUTION!
The heang pad should not be dry cleaned, spun, dried in the machine, mangled or ironed. Otherwise the heang pad
could get damaged.
• In case of a stronger level of contaminaon, the heang pad can be washed in the washing machine.
• Set the washing machine to a 30 °C program (wool program). Out of environmental consideraons, we recommend washing
the heang pad at the same me as other items. Use a gentle detergent in accordance with the manufacturer's dosing
instrucons.
CAUTION!
Note that excessive washing will wear out the heang pad. For this reason, the heang pad should only be machine-
washed a maximum of 5 mes throughout its enre life.
• Immediately aer washing, pull the heang pad in its original size and form while sll wet, and leave it lying at on a drying
rack.
• Do not use pegs or other clamps to aach the heang pad to the drying rack. Otherwise the heang pad could
get damaged.
• Only connect the control to the heang pad when the plug connecon and pad are fully dry. Otherwise the heang
pad could get damaged.
CAUTION!
WARNING
Never switch on the heang pad in order to dry it in this way! You will run the risk of an electric shock.