User Manual

EN - 18
Switching on
Press the ON/OFF buon
to switch on the heang pad. The display switches on - posion 1 - deacvaon me 90 minutes.
To set the required heang posion, press the + buon. To lower the required heang posion, press the - buon.
Seng the heang posion
Posion 1: minimum heang - suitable for long-term use
Posions 2-5: separately adjustable heang
Posion 6: maximum heang
WARNING:
If the heang pad is used for several hours, we recommend
seng the lowest heang posion (posion 1) to prevent the
user's body part to be heated from overheang and prevent
possible potenal burns to the skin or heat stroke.
Switching o
Press the ON/OFF buon
to switch o the heang pad. The display no longer lights up.
ATTENTION
If the heang pad is not used for a number of days, you must switch it o with the ON/OFF buon
and remove
the plug from the socket. Then disconnect the control from the heang pad by removing the plug.
ATTENTION
The heang pad heats up the fastest when you rst switch on a higher temperature posion.
The heang pad has been provided with turbo heang, which ensures quick heang within the rst 10 minutes.
ATTENTION
Automac deacvaon funcon
This heang pad has been provided with an automac deacvaon funcon. This means that the supply of heat is stopped
approx. 30, 60 or 90 minutes aer the heang pad was acvated. Repeatedly press the TIMER buon
to set the automac
deacvaon at the required me - 30, 60 or 90 minutes.
Once the set me has expired, the heang pad is switched o. The display is o.
To be able to use the heang pad again, the ON/OFF buon
should be pressed rst in order to switch on the heang pad.
Select the required heang posion and deacvaon me.