User Manual

EN - 19
CLEANING AND MAINTENANCE
WARNING
Before cleaning the heang pad, always remove the plug from the socket. Otherwise you will run
the risk of an electric shock. Then disconnect the switch from the heang pad by removing the plug.
Otherwise the heang pad could get damaged.
CAUTION!
• The switch may never come into contact with water or other liquids. It could get damaged as a result.
Use a dry lint-free cloth for cleaning the switch. Do not use chemical cleaning agents or abrasives.
Small stains on the heang pad can be removed with a cloth or a damp sponge and, if necessary, a lile bit of gentle detergent liquid.
CAUTION!
• The heang pad should not be dry cleaned, spun, dried in the machine, mangled or ironed.
In case of a stronger level of contaminaon, the heang pad can be washed in the washing machine. Set the washing machine
to a 30°C programme (wool programme). Out of environmental consideraons, we recommend washing the heang pad
at the same me as other items. Use a gentle detergent in accordance with the manufacturer's dosing instrucons.
CAUTION!
• Please note, the heang pad will wear if washed too oen. The heang pad may therefore be machine-washed for
a maximum of 1 to 2 mes per year.
Immediately aer washing, pull the heang pad in its original size and form while sll wet, and leave it lying at on a drying rack.
• Do not use pegs or other clamps to aach the heang pad to the drying rack. Otherwise the heang pad could
get damaged.
• Only connect the switch to the heang pad when the plug connecon and pad are fully dry. Otherwise the heang
pad could get damaged.
CAUTION!
WARNING
• Never switch on the heang pad in order to dry it in this way! You will run the risk of an electric shock.