Instruction Manual

If the appliance is not being used, or is being cleaned, fully switch
o the appliance and remove the plug from the socket.
Allow the appliance to cool down for 30 minutes before storing
or cleaning it.
Ensure that the ingredients being prepared in the appliance come
out golden-brown and not dark or brown. Remove burnt parts.
In case of a breakdown, never make repairs yourself; a tripped
safety device in the appliance could indicate a defect that cannot
be remedied by removing or replacing this safety device. Only
original parts should be used.
This appliance is only suitable for household use. If the appliance
is not used as intended, no compensaon can be claimed in case
of defects or accidents and the warranty will be invalidated.
If you decide to cease using the appliance due to a defect,
we recommend cung o the cord aer removing the plug from
the wall socket. Take the appliance to the waste processing
department concerned of your municipality.

This appliance has been provided with an overheang safety system. If the interior temperature is too high, the appliance is
switched o automacally by the safety system. In that case, the appliance can no longer be used. Remove the plug from the
socket, allow the appliance to cool down and contact the service department of Inventum or your retailer.
This appliance has been provided with a mer. Once the mer is on 00:00, it will count down 20 seconds again. During that
me, the fan connues to run to cool the appliance. Aer that, a sound signal can be heard and the appliance automacally
switches to stand-by. Remove the plug from the socket to switch o the appliance completely.
Extra: when removing a basket while frying, the appliance also switches to stand-by automacally.
This appliance complies with all requirements relang to electromagnec elds (EMF).
OVERHEATING PROTECTION
AUTOMATIC DEACTIVATION
ELECTROMAGNETIC FIELDS (EMF)