Instruction Manual

- 7 -

( 6 ) REMOTE (Remote Control Socket)

Pin assignment of REMOTE socket is shown in the following table for your

convenience. You can connect the supplied control cable for FT-817 to this ACC

socket. Or prepare a suitable control cable for your own radio using the supplied 8

pin DIN plug.

When combining other than FT-817 radio, pin②(TX GND), pin③(GND), and pin⑦

(ALC) must be properly connected to your radio using an optional control cable,

and/or modified control cable.

Pin No. Sign Description

①

N/C -

②

STBY When grounded, amp will become TX state.

③

GND Ground terminal.

④

N/C -

⑤

N/C -

⑥

AUTO To receive band switching signal (DC 0-5V max.).

⑦

ALC ALC voltage (negative DC), to be fed back to radio, will

appear.

⑧

N/C -