Instruction Manual

- 2 -
( 2 ) SPECIFICATIONS
Frequency : HF Band (1.8 ~ 28MHz and 50MHz Amateur Bands)
Mode : SSB(A3E), CW(A1A), FM(F3E)
RF Output Power : SSB (PEP)/CW 45W (Typical maximum output)
RF Drive Power : 5W max.
Duty Cycle 3 minutes (Continuous carrier transmission)
DC Power : DC 13.8V, 8.5A max.
In/Out Impedance :
50Ω
In/Out Connectors : SO-239
Major Circuits and Functions :
① Class AB wide band linear power amp
② Automatic/manual switching output low pass filters
③ WARNG
(Protection circuit for over-voltage and over-drive)
④ LED meter for indicating transmitting power level
⑤ Send-receive switching remote terminal
⑥ ALC
Final RF Power Transistor : RD30HVF (by Mitsubishi Electric) x 2
Accessory Parts : DC Power cord (Red/Black) x 1
Coax jumper cable with PL-259 connectors x 1
Remote control cable for FT-817 x 1
Spare fuse 10A x 2
Dimensions : 150(W) x 47(H) x 211(D) mm (5.9 x 1.9 x 8.3 inches)
Weight : Approx. 1.6kgs. (3.4lbs.)
Optional Parts : Remote control cable with 45B mini DIN/RCA phono
jacks (for non FT-817 radios)