User's Manual

F
USE
FUSE
ANT B ANT A
INPUT
ALC ADJ
ALC
S
END
TUNER
SELECT
AC IN
FUSE
FUSE
REMOTE
DC OUT
12V2A
CONT
SERIAL
USB
G
N
D
1 2 3 4 5 6
7 8
9 10 12 1611 13 14 15 17
F
USE
FUSE
F
USE
FUSE
F
USE
F
USE
FUSEFUSE
ANT B ANT A
INPUT
ALC ADJ
ALC
S
END
TUNER
SELECT
AC IN
FUSE
FUSE
REMOTE
DC OUT
12V2A
CONT
SERIAL
USB
G
N
D
1 2 3 4 5 6
7 8
9 10 12 1611 13 14 15 17
7 Rear Panel Description
①
ANT-B RF Output Connector. Connect coax cable to the antenna B.
②
ANT-A RF Output Connector. Connect coax cable to the antenna A.
③
TUNER DIN Socket. Connect the control cable from External Auto
Antenna Tuner, HC-1500AT and or HC-1.5KAT.
④
SELECT Switch to select the transceiver (i.e. “CI-V” for ICOM CI-V, “I”
for ICOM DC Voltage, “Y” for Yaesu, “K” for Kenwood, “Aux1-3” for three
auxiliary positions of N.C./no connection.).
⑤
DC OUT 12V 2A, Auxiliary DC power supply terminal.
⑥
REMOTE Connector to switch the amp ON and OFF in the remote
location.
⑦
ALC ADJ. Potentiometer to adjust ALC voltage level. Minus 10 V is
available at maximum, when turned fully clockwise.
Factory setting is 0 volts, with the pot turned fully counter-clockwise.
-8 -