User's Manual

-31 -
Pin # Signal Description Remarks
1 WAKE-UP+ Start up voltage IN
＋
Start up when
DC12V applied.
(DC12V100mA)
2 WAKE-UP- Start up voltage IN
－
3
OPER_EXT External OPER Input To enter “Operate”
when pin 3 grounded
(15mA). 5V, when
Open
4 GND Signal GND
12-E REMOTE Connector
Pin Assignment
For controlling the amplifier from the remote location. (Type SMP04V by Nichiatsu)
Note : Please refer to “Remote Controlled Operation” Section.
Note
１２ Technical Information About Various Connectors