Manual

SOVIET RIFLES AND CARBINES
IDENTIFICATION AND OPERATION
ORDI 7-101
May 1954
FIGURE 64. REMOVING BOLT AND SLIDE.
FIGURE 65. REMOVING BOLT FROM SLIDE.
0)
(8)
Remove the trigger mechanism.
Turn the serrated cover on the rear of the
receiver one-quarter turn to the right, and press the detent through the hole in
the rear of the receiver (fig. 66).
This actuates the trigger group locking bar,
which unlocks the trigger mechanism.
The mechanism is then forced out of the
receiver by a small spring on the underside of the stock (fig. 67).
Remove the
split screw on the side of the stock, just forward of the magazine opening.
The
butt of the two-piece stock can now be removed.
Remove the forestock and handguard.
Depress the stock band catch and slide the
bands forward.
Separate perforated metal cover by pushing it rearward, then
remove the handguard and forestock.
46