Operation Manual

CD / MP3 OPERATION
E-6
GENERAL OPERATION
PLAY / PAUSE / USB Press to start playing CD / MP3 disc.
Press again to stop playing CD / MP3 operation temporarily.
Press again to resume playback.
SKIP + & Press to go to the next track or back to the previous track.
SKIP - Press and hold while playing until you find the point of the sound.
S
ALBUM +
TOP P
Press this button during playback to change to a higher
DIR + &
DIR - (ON THE REMOTE
CONTOL)
Press this button during playback to change to a higher or
lower folder.
folder. The display, e.g. ALBUM 001, flashes briefly. Then
the CD begins to play back automatically. If the button is
pressed in stop mode the display also fl ashes. Then start
playback with the PLAY / PAUSE button.
ress to stop all CD / MP3 operation.
PLAYBACK
1. Set the “FUNCTION” selector to “CD / MP3” mode.
2. Open the CD door by pushing on the OPEN knob on the CD cover and place a CD / MP3 disc with
the label up on the CD compartment.
3. Close the CD door.
4. Focus search is performed if disc is inside. Total number of tracks is read and appears on the display.
5. Playback will start automatically from the first track.
6. Adjust the “VOLUME” control to the desired level.
7. Press the “PLAY / PAUSE / USB” button again when you want to stop playback temporarily. Pause
indicator will flash on the display. Press again the same button on resume playback.
8. Press the “STOP” button when finished.