Operation Manual
TOKAI Ǧͷʹ͵ 52
DISC USB AND SD CARD OPERATION
1. LOAD/ UNLOAD DISC , USB OR SD CARD
To play files in a disc,directly insert the disc into the disc slot..
To unload a disc ,press the STOP button twice to stop playback, then press the EJECT button to eject disc
from the disc slot.
To play files in a card,press the REL button to release the front panel and remove it, then insert the SD/MMC
card to the card slot.
To unload a CARD , press the STOP button twice to stop playback, then press the REL button to release the
front panel and remove it. Push the card firstly and pull it out of the card slot.
To play files in a USB, insert the USB into the USB jack on the front panel.
To unload the USB, press the STOP button twice and then remove the USB .
In USB or CARD mode, select your desired mode as below:
USB INTERFACE SD INTERFACE
Remark: the icon is for audio files; the icon is for video files;
The icon is for image files.
Tap the icon to turn to mode menu, tap the icon to turn to folder interface.
In the UAB/CARD mode interface, the icons
are same as the buttons MUTE,STOP, RDM,REPEAT, |<<,PLAY/PAUSE, >>| on the remote control.
The icons in the interface are for fast backward and fast forward playback.
Note: The USB input with charging function.( not all products can be charged from the unit).