Operation Manual

EN-7
Telephone book:
You can transfer up to 20 contacts (Telephone book entries) from the connected mobile phone to the device and
thus dial and call the contact from the device.
Notice:
• YoucannottransferviaBluetoothyourcontactsfromyourconnectedmobiletoyourcarradiowithAPPLE
®
phones.
• DetailsforthetransferenceofthecontactviaBluetoothcanbeobtainedfromtheoperatinginstructionsofyour
mobile phone.
• EachtransferredcontactisfiledinthememoryslotPB01. The contacts that have already been transferred are
auto matically filed one memory slot further (PB02, etc).
• Pressandhold [SEL] button to select Call list mode. “Call list” shows on LCD. Rotate the volume knob to select
“PH BOOK”. Press [BAND]ENTER button to confirmed.
• RotatetheVolumeknobtoappearsthenameandnumber(PB01-PB20).
• Pressthe “ ” button on the device to select the dialled call number.
Deleting the caller lists and telephone book entries
When the mobile phone’s bluetooth was connected with device, press [MODE] button repeatedly to select “BT
mode”. Press and hold the “ ” button on the device until RESET appears in the display. The Bluetooth con-
nection to the mobile phone is severed and all telephone book entries and caller lists on the device are deleted.
Audio streaming (A2DP)
The device uses the A2DP profile (Advanced Audio Distribution Profile) and therefore can playback your mobile
phone’s audio data.
• Selectanaudiofilefromyourmobilephoneandstarttheplayback.
In the device’s display appears the entry A2DP and the audio data will be played back via the speakers connected
to the device.
NOTICE:
• OnthemobilephoneitmaypossiblybenecessarytoswitchplaybackviatheBluetoothstereoheadset.Consult
the operating manual of your mobile phone for more information.
• WithafewmobilephonesthedevicedoesnotautomaticallyswitchtotheA2DPmode.Inthiscaseyouswitch
totheA2DPmodebypressingtheMODE button several times until the notice BT MUSIC or A2DP appears in
the display.
AVRCP (Audio Video Remote Control Profile)
The device uses the AVRCP profile thus facilitating the control of audio devices.
• WiththePreset 1(12) button on the device you can stop and/or restart the playback of audio files on the mobile
phone.
• Withthebuttons or on the device you can access the previous or next audio file on the mobile phone.
24. RESET
Reset button (24) is placed on the housing.
The reset button is to be activated for the following reason:
• Initialinstallationoftheunitwhenallwiringiscompleted.
• Allthefunctionbuttondonotoperate.
• Errorsymbolonthedisplay.