Operation Manual

EN-6
Connecting it to Portable MP3 Player
RESET
USB
AUX
SD card slot
USB port
AUX IN
20,21. USB PORT / SD MEMORY CARD
The device is equipped with a USB interface and a memory card reader for SD cards. MP3 or WMA files stored
on these media can be played.
1. Plug your USB storage medium into the USB port.
2. If you use a memory card, insert it into the memory card reader.
3. The player automatically switches to the input used and starts playback.
4. See the section on operations common for audio files on how to control USB or memory card playback.
Note:
 • DuetothegreatvarietyofdeviceswithUSBandSDcardinterfacesthatsometimeshavemanufacturer-
specific functions, we cannot guarantee that all media will be recognized and that all operational functions
will be available with this device.
 • YoucannotoperateUSBharddrivesonthedevice.
22. FRONT AUX IN
Convenient easy to use front “AUX IN” input jack, allows easy connection of Portable Media and digital MP3
Players.
HOW TO USE BLUETOOTH IN YOUR CAR AUDIO
The microphone unit must be connected to the device in order to use the Bluetooth functions. In addition a mobile
phone is required that supports the Bluetooth data transmission.
Connecting the telephone to the device
• ActivatetheBluetoothfunctiononyourmobilephoneandconductasearchforBluetoothdevices.Afterasuc-
cessful search the entry CarBT appears for the device in the display of the mobile phone.
• Selectthisentryfortheconnectionandforthesubsequentpasswordrequestenterthepassword1234 for the
device. You may possibly have to confirm the connection structure once more.
After a successful coupling CONN OK appears briefly in the device’s display.
Call accept/end
With an incoming call you hear the call signal via your mobile phone, whilst in the device’s display is shown the
call number.
• You accept an incoming call by the “ ” button on the device.
• Youendthecallbypressingthe“ ” button on the device.
Rejecting a call
• Withanincomingcallpressthe“ ” button on the device to reject the call.
To call
• Thedeviceandthemobilephonemustbeconnected.
• Dialthetelephonenumberthatyouwanttocallfromyourmobilephone.
• Thedrivercanusethedeviceashands-freekit.
Redial
• Holddownthe “ ” button on the device for approx. 2 seconds.
• Ifpreviouslynocallnumberwasselectedviathenumberbuttonsonthedevicethelastselectedmobilephone
call number is dialled.
• Ifpreviouslyacallnumberwasselectedviathenumberbuttonsonthedevicethiscallnumberisdialled.
Caller lists
• Pressandhold [SEL] button to select Call list mode.
• PresstheBAND(ENTER) button. IN CALL: Shows the last 20 incoming calls.
• PresstheBAND(ENTER) button again. OUT CALL: Shows the last 20 outgoing calls.
Note:
• TheCallListfeaturewillbeactivatedoncethemobilephoneisconnectedwiththecarradioviaBluetooth.