Operation Manual

EN-7
Connecting it to Portable MP3 Player
27. USB Port
Using USB cable to connect Your Portable MP3 Player.
28. MULTI-MEDIA CARD (MMC) / SD CARD SLOT
Support MP3/WMA ID3 format music only.
* IMPORTANT INFORMATION:
BECAUSE OF THE GREAT VARIETY OF PRODUCTS WITH USB,SD AND MMC CARD PORTS AND THEIR SOME-
TIMES QUITE MANUFACTURER-SPECIFIC FUNCTIONS WE CAN NEITHER GUARANTEE THAT ALL DEVICES WILL
BE RECOGNIZED NOR THAT ALL OPERATING OPTIONS THAT ARE POSSIBLE IN THEORY WILL ACTUALLY WORK
29. FRONT AUX IN
 Convenienteasytousefront“AUXIN”inputjack,allowseasyconnectionofPortableMediaanddigitalMP3Players.
HOW TO USE BLUETOOTH IN YOUR CAR AUDIO
How to Perform Pairing
Beforeyoucandialoutfromthecarstereo,youmustrstperformPAIRING.Pairingisaprocedureusedtoconnect2
Bluetooth devices together.
1. This unit’s Bluetooth function is always on, perform the pairing starting from your cellular phone. Refer to your cellular
manual on proper pairing.
2. Perform the search for available Bluetooth devices, “CarBT ” will show. Enter ‘1234’ when asking for code.
3. After successful pairing, connect to the head unit if it is not automatically connected.
Notice: This unit can pairs up to three Bluetooth devices.
How to call / receive calls using wireless remote controller
• Tomakecalls,press“ ” button on the remote controller followed by pressing TEL NO using number keys.
• AfterenteringTELNO,press“ ” again to dial out.
• Duringconversation,press“ ” button to end call.
• Whenthereisincomingcall,press“ ” button to receive call.
• Press“ ”buttontorejectincomingcalls.
How to make / receive calls using front panel
• Redialcalls:
1. Press and hold “ ” to redial last call.
2. Press “ ” to dial out.
• Duringconversation,press“ ” button to end call.
• Whenthereisincomingcall,press“ ” button to receive call.
• Press“ ”buttontorejectincomingcall.
Audio Streaming
1. If your phone is “A2DP” format is compatible, you can play music in your mobile and the music will be transferred to
car audio unit.
2. Make sure your mobile and the car radio unit is paired and connected.
3. Play the music in your mobile according to your mobile operating method.
4. Press MD/LD button to change A2DP mode.
5. You can press or onheadunitforpreviousornexttracks.
Notice:
• OnthemobilephoneitmaypossiblybenecessarytoswitchplaybackviatheBluetoothstereoheadset.Consultthe
operatingmanualofyourmobilephoneformoreinformation.
• WithafewmobilephonesthedevicedoesnotautomaticallyswitchtotheA2DPmode.Inthiscaseyouswitchtothe
A2DPmodebypressingtheMDbuttonseveraltimesuntilthenoticeBT MUSIC or A2DPappearsinthedisplay.