User Manual

ManualsBrandsTOHO ELECTRONICS ManualsSensorsTTM-509

TOHO TOHO ELECTRONICS INC.

Operation Specifications

Model: TTM-509

Designation: Digital controller

Development code: K163

APPROVED

CHECKED

DESIGNED

DATE

December 16, 2003

Job. No.

K163

MODEL

TITLE

TTM-509

Operation Specifications

TTM-509

DWG. No.

PAGE

TOHO ELECTRONICS INC.

45-4199-E

1/66

Common document

Technical document

Summary of content (66 pages)

PAGE 1
TOHO TOHO ELECTRONICS INC. Operation Specifications Model: TTM-509 Designation: Digital controller Development code: K163 APPROVED APPROVED CHECKED DESIGNED DATE December 16, 2003 TITLE Job. No. K163 TTM-509 Operation Specifications MODEL DWG. No. TTM-509 TOHO ELECTRONICS INC.
PAGE 2
TOHO TOHO ELECTRONICS INC. DWG. No. 45-4199-E PAGE 2/66 Contents 1. Scope....................................................................................................................................................... 4 2. LED description ...................................................................................................................................... 4 2.1 7-segment LED.......................................................................................................
PAGE 3
TOHO TOHO ELECTRONICS INC. DWG. No. 45-4199-E 5. PAGE 3/66 4.4.8 Setting mode for DI 1 to 4 ........................................................................................... 54 4.4.9 Setting mode for communications 1 and 2................................................................... 55 4.4.10 Timer setting mode ...................................................................................................... 56 4.4.11 Logging setting mode ....................................
PAGE 4
TOHO TOHO ELECTRONICS INC. DWG. No. 45-4199-E 1. Scope This set of specifications applies to Digital Controller TTM-509. 2. LED description 2.1 7-segment LED ③ ① ② MAN RDY REM OUT1 OUT3 OUT5 DI1 DI3 OUT2 OUT4 OUT6 DI2 DI4 CH A/M F1 F2 F3 MODE ▼ ▲ << ENT ① PV, 7-segment Displays PV and characters being set. ② SV, 7-segment Displays SV, settings, and monitor. ③ Auxiliary display, 7-segment Displays CH and/or other details.
PAGE 5
TOHO TOHO ELECTRONICS INC. DWG. No. 45-4199-E 2.2 LED lamp ① ④ MAN ⑤ RDY ⑥ ② ③ REM ⑦ ⑧ ⑨ ⑩ ⑪ OUT1 OUT3 OUT5 DI1 DI3 OUT2 OUT4 OUT6 DI2 DI4 CH A/M F1 F2 F3 MODE ▼ ▲ << ENT ⑫ ⑬ ⑭ ⑮ ⑯ ⑰ ① MAN lamp Lights up when in the manual mode. ② RDY lamp Lights up when in the RDY (Ready) mode. ③ REM lamp Lights up when in the REM (remote) mode. ④ Over-the-deviation lamp ⑤ Within-the-deviation lamp ⑥ Below-the-deviation lamp Displays the relational status of the PV and SV.
PAGE 6
TOHO TOHO ELECTRONICS INC. DWG. No. 45-4199-E ⑧ ⑨ ⑩ ⑪ ⑫ ⑬ OUT1 lamp OUT2 lamp OUT3 lamp OUT4 lamp OUT5 lamp OUT6 lamp Lit when the output of the output monitor is ON (active). ⑭ ⑮ ⑯ ⑰ DI1 lamp DI2 lamp DI3 lamp DI4 lamp Lit when the input of the input monitor is ON (active).
PAGE 7
TOHO TOHO ELECTRONICS INC. DWG. No. 45-4199-E 3. Key description MAN RDY REM OUT1 OUT3 OUT5 DI1 DI3 OUT2 OUT4 OUT6 DI2 DI4 CH A/M F1 F2 F3 MODE ▼ ▲ << ENT ① ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨ ⑩ ① CH key Changes displayed channels. ② A/M key Toggles the system between Auto and Manual. ③ F1 key ④ F2 key ⑤ F3 key Serve as function keys, thus setting an operation. ⑥ MODE key Changes screens. ⑦ ▼ key ⑧ ▲ key Change the setting. ⑨ ≪ key Moves the setting change digit.
PAGE 8
TOHO TOHO ELECTRONICS INC. DWG. No. 45-4199-E PAGE 8/66 4. State description 4.1 Operation state Functions can be assigned to DI and keys to toggle the system between Auto and MAN, and between RUN and RDY. RDY requested RDY MAN RUN/RDY toggling requested Auto/MAN toggling requested Auto（ Auto（RUN） RUN） • The operation state of CH1 and that of CH2 are asynchronous. Pressing the A/M key on the entire surface changes the channel displayed currently.
PAGE 9
TOHO TOHO ELECTRONICS INC. DWG. No. 45-4199-E Initial screen Power ON About 2 seconds Option Input 2 Input 1 Output 1 Output 2 Output 3 and 4 Output 5 and 6 About 2 seconds Green ＣＨ key MODE key Operation screen MODE key Priority screen 1 Displayed when priority screens are assigned to FUNC 1, 2, and/or 3 keys.
PAGE 10
TOHO TOHO ELECTRONICS INC. DWG. No. 45-4199-E About the initial screen Initial screen 1 (input/output check screen) Green Red Input 2 Input 1 Output 1 Output 2 Output 3 and 4 Output 5 and 6 Input 1: See "Input 1 setting type, 4.4.4 Initial setting mode." Input 2: See "Input 2 setting type, 4.4.4 Initial setting mode.
PAGE 11
TOHO TOHO ELECTRONICS INC. DWG. No.
PAGE 12
TOHO TOHO ELECTRONICS INC. DWG. No. PAGE 45-4199-E 12/66 When banks are switched over with DIs, the method of switchover varies according to the number of DIs to be assigned.
PAGE 13
TOHO TOHO ELECTRONICS INC. DWG. No. 45-4199-E PAGE 13/66 4.2 Timer state 4.2.1 Setting a timer output destination The timer output can be connected to "control" or "event output (1-6)" to control "control" and events 1 and 3 with the timer. It can thus be set to a desired setting. In the case of "timer disabled," set the timer time to 0:00. 4.2.2 Setting a timer function The options available are "auto start," "manual start," "event start," and "SV start.
PAGE 14
TOHO TOHO ELECTRONICS INC. DWG. No. 45-4199-E PAGE 14/66 (2) OFF delay Turning on the system starts it in a startup setting state. When a set time is up, control stops. Power OFF Power ON OFF delay (control in progress) Stop state (control stopped) OFF delay T.O. (3) Repeat Turning on the system starts it in a startup setting state. It will repeat a set number of ON delays and OFF delays, then ends in a final setting state.
PAGE 15
TOHO TOHO ELECTRONICS INC. DWG. No.
PAGE 16
TOHO TOHO ELECTRONICS INC. DWG. No. 45-4199-E PAGE 16/66 4.3 Setting mode Press the MODE key for 3 seconds while in the operation mode. The system will then switch to the "Select the setting mode" screen. While in that state, use the ▲ and ▼ key to select a setting category and press the MODE key to enter the setting mode for a specific category.
PAGE 17
TOHO TOHO ELECTRONICS INC. DWG. No. PAGE 45-4199-E 17/66 Bank setting mode Operation mode   Press the MODE key for 6 seconds. The system will display another screen once. But hold the key down.  Press the MODE key for 3 seconds. Bank 0 Set the SV on CH2. CH key    Press the MODE key for 3 seconds.    Bank 0 Set the SV on CH1.  MODE key Bank 0 Select the control setting. The following flow is the same as that for the control setting.
PAGE 18
TOHO TOHO ELECTRONICS INC. DWG. No. 45-4199-E 4.3.
PAGE 19
TOHO TOHO ELECTRONICS INC. DWG. No. 45-4199-E 4.3.
PAGE 20
TOHO TOHO ELECTRONICS INC. DWG. No. 45-4199-E PAGE 20/66 4.3.
PAGE 21
TOHO TOHO ELECTRONICS INC. DWG. No.
PAGE 22
TOHO TOHO ELECTRONICS INC. DWG. No.
PAGE 23
TOHO TOHO ELECTRONICS INC. DWG. No.
PAGE 24
TOHO TOHO ELECTRONICS INC. DWG. No.
PAGE 25
TOHO TOHO ELECTRONICS INC. DWG. No.
PAGE 26
TOHO TOHO ELECTRONICS INC. DWG. No. 45-4199-E 4.3.
PAGE 27
TOHO TOHO ELECTRONICS INC. DWG. No. 45-4199-E 4.3.
PAGE 28
TOHO TOHO ELECTRONICS INC. DWG. No. 45-4199-E 4.3.
PAGE 29
TOHO TOHO ELECTRONICS INC. DWG. No. 45-4199-E 4.3.
PAGE 30
TOHO TOHO ELECTRONICS INC. DWG. No. 45-4199-E 4.3.
PAGE 31
TOHO TOHO ELECTRONICS INC. DWG. No. 45-4199-E 4.3.
PAGE 32
TOHO TOHO ELECTRONICS INC. DWG. No. 45-4199-E 4.3.
PAGE 33
TOHO TOHO ELECTRONICS INC. DWG. No. 45-4199-E 4.3.
PAGE 34
TOHO TOHO ELECTRONICS INC. DWG. No. 45-4199-E 4.3.
PAGE 35
TOHO TOHO ELECTRONICS INC. DWG. No. 45-4199-E 4.3.
PAGE 36
TOHO TOHO ELECTRONICS INC. DWG. No.
PAGE 37
TOHO TOHO ELECTRONICS INC. DWG. No. 45-4199-E 4.3.
PAGE 38
TOHO TOHO ELECTRONICS INC. DWG. No. 45-4199-E 4.3.
PAGE 39
TOHO TOHO ELECTRONICS INC. DWG. No. PAGE 45-4199-E 39/66 4.4 Setting initial value and setting range 4.4.
PAGE 40
TOHO TOHO ELECTRONICS INC. DWG. No. PAGE 45-4199-E 40/66 4.4.3 Setting mode for priority screens 0 to 3 The code "pr" represents priority screen numbers ( to ). Character PV screen Auxiliary screen Designation Description 1 □ □□□□ Select priority screen 0 setting. Setting concerning priority screen 0 2  pr △ The pr-th setting for priority screen 0 This sets a screen pr (1 to 9) to be displayed on priority screen 0.
PAGE 41
TOHO TOHO ELECTRONICS INC. DWG. No. PAGE 45-4199-E 41/66 4.4.4 Initial setting mode The code "ch" represents input channels ( to ).
PAGE 42
TOHO TOHO ELECTRONICS INC. DWG. No. PAGE 45-4199-E Character PV screen Auxiliary screen Designation Description 42/66 Initial value 4 □ch  Set a decimal place Thermocouple input: / Resistance bulb (including a 4-wire type): // *For , set an input type: In the range from -120.00 to 120.00 only Current and voltage: Set it to a desired digit. Potentiometer: Fixed at   5  ch  Set a PV correction gain Setting range: 0.500 to 2.
PAGE 43
TOHO TOHO ELECTRONICS INC. DWG. No. PAGE 45-4199-E Character PV screen Auxiliary screen 10  ch  Designation Set a deviation display range Description Thermocouple input Setting range: 0 to 999 or 0.0 to 999.9 Setting unit: °C Initial value  Resistance bulb input Setting range: 0 to 999 or 0.0 to 999.9 or 0.00 to 999.99 (when the input type is , , or ) Setting unit: °C Current and voltage inputs Setting range: 0 to 99999 The decimal place can be set to a desired position.
PAGE 44
TOHO TOHO ELECTRONICS INC. DWG. No. PAGE 45-4199-E 44/66 4.4.
PAGE 45
TOHO TOHO ELECTRONICS INC. DWG. No. PAGE 45-4199-E Character PV screen Auxiliary screen 13  ch  Designation Set a control type Description Timer connection channel : Unrelated to the timer : The timer starts/stops control.
PAGE 46
TOHO TOHO ELECTRONICS INC. DWG. No. PAGE 45-4199-E Character PV screen Auxiliary screen 18  ch  Designation Set an AT sensitivity Description Thermocouple input Setting range: 0 to 999 or 0.0 to 999.9 Setting unit: °C Resistance bulb input Setting range: 0 to 999 or 0.0 to 999.9 or 0.00 to 999.99 (when the input type is, , or ) Setting unit: °C Current and voltage inputs Setting range: 0 to 99999 The decimal place can be set to a desired position.
PAGE 47
TOHO TOHO ELECTRONICS INC. DWG. No. PAGE 45-4199-E Character PV screen Auxiliary screen Designation Description 47/66 Initial value 27  ch  Set the main output operation amount change limiter to rise Setting range: 0.0 to 120.0 Setting unit: %/sampling cycle  28  ch  Set the main output operation amount change limiter to fall Setting range: 0.0 to 120.0 Setting unit: %/sampling cycle  29  ch  Setting range: 0.0 to 100.0 (-10.0 to -110.
PAGE 48
TOHO TOHO ELECTRONICS INC. DWG. No. PAGE 45-4199-E Character PV screen Auxiliary screen Designation Description 48/66 Initial value 38 □ch  Set a control sensitivity for the main output Thermocouple input Setting range: 0 to 999 or 0.0 to 999.9 Setting unit: °C  40 □ch  Set a control sensitivity for the auxiliary output Resistance bulb input Setting range: 0 to 999 or 0.0 to 999.9 or 0.00 to 999.
PAGE 49
TOHO TOHO ELECTRONICS INC. DWG. No. PAGE 45-4199-E Character PV screen Auxiliary screen 42 □ch  Designation Set a dead band Description Thermocouple input Setting range: -100 to 100 or -100.0 to 100.0 Setting unit: °C Resistance bulb input Setting range: -100 to 100 or -100.0 to 100.0 or -100.00 to 100.00 (when the input type is , , or ) Setting unit: °C Current and voltage inputs Setting range: -1000 to 1000 The decimal place can be set to a desired position.
PAGE 50
TOHO TOHO ELECTRONICS INC. DWG. No. PAGE 45-4199-E 50/66 4.4.
PAGE 51
TOHO TOHO ELECTRONICS INC. DWG. No. PAGE 45-4199-E Character PV screen Auxiliary screen 4 □  to □  □  to □  Designation Set an upper limit for event output 1 to 6 Set a lower limit for event output 1 to 6 Description Thermocouple input Setting range: -199 to 999 or -199.9 to 999.9 Setting unit: °C Resistance bulb input Setting range: -199 to 999 or -199.9 to 999.9 or -199.99 to 999.
PAGE 52
TOHO TOHO ELECTRONICS INC. DWG. No. PAGE 45-4199-E Character PV screen Auxiliary screen 7 □  to □  Designation Description Set a special function for event output 1 to 6 Display color switchover : The PV display color remains unchanged even if the special event is turned on. : The PV display color changes if the special event is turned on.
PAGE 53
TOHO TOHO ELECTRONICS INC. DWG. No. PAGE 45-4199-E 53/66 4.4.
PAGE 54
TOHO TOHO ELECTRONICS INC. DWG. No. PAGE 45-4199-E 54/66 4.4.
PAGE 55
TOHO TOHO ELECTRONICS INC. DWG. No. PAGE 45-4199-E 55/66 4.4.9 Setting mode for communications 1 and 2 Communications 1 is for RS232C and RS485. Communications 2 is for infrared communications.
PAGE 56
TOHO TOHO ELECTRONICS INC. DWG. No. PAGE 45-4199-E 56/66 4.4.10 Timer setting mode Character PV screen Auxiliary screen Designation Description 1 □ □□□□ Select the timer Setting concerning the timer 2 □  Set a timer function : : : : Auto-start Manual start Event start SV start (OFF delay only) Initial value  Setting a value for the ON delay timer to be mentioned below will activate it as an ON delay timer.
PAGE 57
TOHO TOHO ELECTRONICS INC. DWG. No. PAGE 45-4199-E Character PV screen Auxiliary screen Designation Description 57/66 Initial value 5   Set a time for the ON delay timer Setting range: 0.00 to 99.59 (hours and minutes) 0.00 to 59.59 (minutes and seconds) Setting unit: Hours and minutes or minutes and seconds This is inactive in the case of the SV start.  6   Set a time for the OFF delay timer Setting range: 0.00 to 99.59 (hours and minutes) 0.00 to 59.
PAGE 58
TOHO TOHO ELECTRONICS INC. DWG. No. PAGE 45-4199-E 58/66 4.4.12 CT setting mode Character PV screen Auxiliary screen Designation Description 1 □ □□□□ Select a CT Setting concerning CTs 2 3 □  to □  Set a target from CT1 and CT2 : Monitor only : Output 1 : Output 2 : Output 3 : Output 4 : Output 5 : Output 6  to  is only displayed when the specific output is set to the main or auxiliary output. Setting CT 1 and CT 2 to the same output results in 3-phase detection.
PAGE 59
TOHO TOHO ELECTRONICS INC. DWG. No. PAGE 45-4199-E 59/66 4.4.13 Setting mode for CH 1 polygonal line approximation Polygonal line approximation is for outputting  when inputting . Character PV screen Auxiliary screen Designation Description 1 □ □□□□ Select CH 1 polygonal line approximation 2 to 17   to   Thermocouple input Set an input for Setting range: -199 to 999 or -199.9 to 999.
PAGE 60
TOHO TOHO ELECTRONICS INC. DWG. No. PAGE 45-4199-E 60/66 4.4.14 Setting mode for CH 2 polygonal line approximation Polygonal line approximation is for outputting  when inputting . Character PV screen Auxiliary screen Designation Description 1 □ □□□□ Select CH 2 polygonal line approximation 2 to 17   to   Thermocouple input Set an input for Setting range: -199 to 999 or -199.9 to 999.
PAGE 61
TOHO TOHO ELECTRONICS INC. DWG. No. PAGE 45-4199-E 61/66 4.4.15 Setting mode for logging contents Character PV screen Auxiliary screen Designation Description 1 □ □□□□ Select logging contents Setting concerning logging contents 2 to 10   to   First to ninth setting for logging This sets information to be recorded in a log.
PAGE 62
TOHO TOHO ELECTRONICS INC. DWG. No. PAGE 45-4199-E 62/66 4.4.16 Key setting mode Character PV screen Auxiliary screen Designation Description Initial value 1 □ □□□□ Select key setting Setting concerning key setting 2 3 4 □  to □  Set the FUNC 1 to 3 key : No function  : Starts and stops AT : RUN/READY : Starts and resets the timer : Releases event holding : Secret (See 4.6 "Secret function.
PAGE 63
TOHO TOHO ELECTRONICS INC. DWG. No. 45-4199-E PAGE 63/66 4.5 Blind setting mode Power ON ↓ Initial screen display (about 4 seconds) ↓ Operation mode ↓ MODE key 10 seconds  Screen display blinking ↓ Press the ENT key once. ↓ Press the MODE key once. Blind setting mode To terminate the blind setting mode, press the MODE key for 10 seconds. 4.6 Secret function Specify "Secret" in the FUNC key setting and press the FUNC key to switch to the screen for entering a PIN number.
PAGE 64
TOHO TOHO ELECTRONICS INC. DWG. No. 45-4199-E PAGE 64/66 5. History Revision A, January 8, 2004, by Ishihara and Sato An operation flow was added. 1) Cover: The model TTM-509 (tentative) was changed to "TTM-509. 2) P7: The ▲ and ▼ in ⑦ and ⑧, which had been in the wrong order, were corrected. 3) P9: A transition that occurs when the FUNC key is pressed in a priority screen was added. 4) P10: The color of the I in the initial screen was changed from "orange" to "green.
PAGE 65
TOHO TOHO ELECTRONICS INC. DWG. No. 45-4199-E 30) 31) 32) 33) PAGE 65/66 P55: Communications speed: "Infrared communications cannot select 4,800bps" was deleted. P57: The auxiliary screen was changed to . P61: The designation , which had been "First setting for logging," was corrected to "Ninth." P62: "Set the operation mode display" was added. Revision B, May 20, 2004, Ishihara 34) The method of setting cascade and remote control were changed.
PAGE 66
TOHO TOHO ELECTRONICS INC. DWG. No. 45-4199-E PAGE 66/66 Revision C, July 7, 2004, Ishihara 56) P63: The method of entering and quitting the blind setting mode was changed. 57) P17: The method of returning from the bank setting mode to the operation mode was changed. 58) P57: The timer start was changed to ENT on the timer residual time monitor. 59) P57: The item of "Set logging start/stop" was entirely rewritten. 60) P57: A screen was added for setting the year, month, and day.