Technical data sheet

Table Of Contents
INSPECTION AND MAINTENANCE62
10
ENOM00081-A
Oil level checking
If the oil level is low, or too high, the life of
the engine will be shortened significantly.
1. Stop the engine and set it in a vertical
position.
2. Remove the top cowl.
3. Remove the dipstick after 5 minutes
engine has stopped.
4. Wipe oil off the oil dipstick with a clean
rag.
5. Put in the dipstick.
6. Take out the dipstick and check the oil
level.
7. Return the dipstick.
1. Filler cap
2. Dipstick
1. Upper level 1800 mL
2. Lower level 1500 mL
ENON00024-0
Note
The oil level should be checked when the
engine is cold.
ENON00025-0
Note
Consult with an authorized dealer if the
engine oil is milky color, or appears contam-
inated.
ENOM00082-A
Engine oil replenishing
ENOW00079-A
z Do not add engine oil of brand and grade
other than existing one. In case engine
oil of other brand or grade is added,
drain all oil and ask dealer for treatment.
z In case other than engine oil such as
gasoline is put in the oil chamber, empty
the chamber and ask dealer for treat-
ment.
z When replenishing engine oil, be careful
not to allow entry of foreign matters
such as dust and water into oil chamber.
Steering
Devices
Check the operation of the steering handle. Repair
Other parts
Check if the anode is securely installed. Repair if necessary
Check the anode for corrosion and deformation. Replace
Item Points to Check Remedy
ENOF01121-0
1
2
CAUTION
2
1
ENOF00081-0
0)6&B(85B(1B1ERRN࣮࣌ࢪ㸰㸮㸯㸲ᖺ㸯㸯᭶㸰㸰᪥ࠉᅵ᭙᪥ࠉ༗๓㸯㸯󰪍㸲㸲ศ