Technical data sheet
Table Of Contents
- OWNER’S MANUAL
- GENERAL SAFETY INFORMATION
- SPECIFICATIONS
- PARTS NAME
- LABEL LOCATIONS
- INSTALLATION
- PRE-OPERATING PREPARATIONS
- ENGINE OPERATION
- REMOVING AND CARRYING THE OUTBOARD MOTOR
- ADJUSTMENT
- INSPECTION AND MAINTENANCE
- TROUBLESHOOTING
- TOOL KIT AND SPARE PARTS
- PROPELLER TABLE
- MANUEL DE L'UTILISATEUR
- MANUAL DEL PROPIETARIO
- BENUTZERHANDBUCH
ENGINE OPERATION 41
7
1. Remove the top cowl.
2. Remove starter lock cable from recoil
starter by pulling the starter lock cable.
3. Remove the bolts (5pcs) and remove
the recoil starter.
4. Insert the knotted end of the starter
rope into the notch in the flywheel and
wind the rope around the flywheel sev-
eral turns clockwise.
5. Tie a loop in the another end of the
emergency starter rope and attach
socket wrench that is included in the
tool kit.
ENOW00860-0
Be sure to keep the harness away from the
rotation parts.
6. Be sure to install the stop switch lock
to the stop switch, and attach the stop
switch lanyard securely to the operator
or to the operator's PFD (Personal Flo-
tation Device.)
7. Set the control lever in the Neutral
position.
ENOF01111-0
ENOF00124-0
ENOF00125-0
CAUTION
ENOF00126-0
JNOF01120-0
0)6&B(85B(1B1ERRN࣮࣌ࢪ㸰㸮㸯㸲ᖺ㸯㸯᭶㸰㸰᪥ࠉᅵ᭙᪥ࠉ༗๓㸯㸯㸲㸲ศ