Technical data sheet

Table Of Contents
ENGINE OPERATION 39
7
1. Main switch key
ENOW00032-0
Do not keep turning starter motor for over
5 seconds, or the battery may be con-
sumed, potentially making the engine start-
ing impossible and/or damaging the
starter.
If cranking over 5 seconds fails to start
engine, return main switch to “ON”, and
crank engine again after 10 seconds or
more.
6. Check the cooling water from cooling
water check port.
Side mount RC type
1. Be sure to install the stop switch lock
to the stop switch, and attach the stop
switch lanyard securely to the operator
or to the operator's PFD (Personal Flo-
tation Device.)
1. Stop switch lock
2. Insert the main switch key.
3. Set the control lever in the Neutral
position. Do not raise the free throttle
lever when starting the engine.
1. Neutral (N)
2. Control lever
3. Fully open (Forward)
4. Fully closed (Fully closed)
5. Free throttle lever
6. Main switch key
7. Stop switch
ENON00035-A
Note
The free throttle lever can not be raised
when the control lever shift is in Forward or
Reverse.
CAUTION
R
N
F
OFF
ON
START
PUSH TO IDLE CHANGE
1
ENOF00867-A
ENOF01110-0
1
ENOF00869-0
N
R
F
1
2
3
4
5
6
7
ENOF00870-0
0)6&B(85B(1B1ERRN࣮࣌ࢪ㸰㸮㸯㸲ᖺ㸯㸯᭶㸰㸰᪥ࠉᅵ᭙᪥ࠉ༗๓㸯㸯󰪍㸲㸲ศ